If you’re in search of a Nebra Helium miner for sale. Then you are most likely going to place a pre-order with a trusted and approved manufacturer, or purchase from a reseller at a higher price. Some of the online retailers are even accepting emails, so they can notify you once stock has been replenished.

Price / Where to Purchase

LongFi Nebra Miner Price & Specs

Currently, the price you can expect to find for the Nebra outdoor and indoor hotspot mining devices is as follows:

Nebra HNT Outdoor: £540 (≈ $730 USD)
Nebra HNT Indoor: £420 (≈ $570 USD)

The most reliable place that we recommend to purchase is directly from the manufacturer’s website. This way you have a solid contact for customer service to stay updated. Plus, there is a higher chance they will follow through with shipment and deliveries.

Due to the current chip shortage across the market, shipments are being delayed. Although as more stock arrives, deliveries are being fulfilled in batches. When you look at the Nebra website, you can get a better idea of the delivery schedule of those batches.

If you choose to go to the reseller route, be advised that there is a chance you can receive the wrong frequency for your country or a non-approved Helium mining device. Although if you’re dealing with a legitimate reseller, there is a chance you can have it arrive a lot sooner.

To purchase directly from the manufacturer, be sure to click the button below.

 

Available Models & Performance

The Nebra HNT hotspot comes in two form factors. One for indoor use and the other for outdoor use. They both offer three frequency variants such as;

  • 470 MHz (CN470) | China
  • 868 MHz (EU868, IN865, RU864) | Europe, UAE, India, Russia
  • 915 MHz (US915, AU915, KR920, AS923-1/2/3) | North America, Australia, New Zealand, South America, Asia (1)

To find out more about the correct region before making a purchase. Click here.

Outdoor

Nebra Outdoor UnitThe outer physical dimensions of the Nebra HNT outdoor unit measure approximately; 235 mm (9.25″) in length, 155 mm (6.1″) in width and 75 mm (2.95″) in height. Its weight is approximately 1.4 kg (3.1 lbs). The casing is made out of aluminum and provides an optional 4G module.

The device uses a Raspberry Pi Compute Module, with a Broadcom BCM2837B0, Quad Core Cortex-A53 (ARMv8) 64-bit SoC @1.2GHz central processing unit (CPU). The antenna that comes packaged with the Nebra outdoor model, is N-Type Glass Fiber and has a 3dBi peak gain.

Indoor

Nebra Indoor UnitAs for the indoor unit, that measures approximately; 150 mm (5.91″) in length, 150 mm (5.91″) in width and 50 mm (1.97″) in height (excluding the antenna). The casing for the indoor model is made out of plastic.

The Nebra HNT indoor model also uses a Raspberry Pi (CM3+), a similar CPU in processing speed at 1.2Ghz. The antenna that comes packaged with the indoor unit is an RP-SMA LoRa Antenna, that is also 3dBi peak gain.

Frequency Info

The Nebra currently supports; CN470, US915, AU915, EU868, RU864, IN865, KR920 & AS923. The frequencies listed below will work in the following locations:

  • CN470 – China
  • US915 – North America, Mexico, Bahamas, Puerto Rico, Guyana & more
  • AU915 – Australia, Brazil, Peru, Jamaica, Trinidad and Tobago, New Zealand & more.
  • EU868 – Europe, United Arab Emirates, Turkey, Rwanda & more
  • RU864 – Russia
  • IN865 – India, Pakistan, Niger, Uganda & Jordan
  • KR920 – South Korea
  • AS923 – Indonesia, Malaysia, Philippines, Singapore, Thailand, Venezuela, Tanzania, Japan, Hong Kong, Cuba, Costa Rica, Algeria, Bangladesh, Vietnam & more (2)
Additional Information
  • You are more than able to purchase an indoor Nebra device for use outdoors. Just note that it will most likely be larger and will require some customization.
  • Each batch on the Nebra website, ships indoor and outdoor mining devices separately. (3)

As with most electronics & mining devices. There has been a shortage of chips which has slowed down the production and shipment of these tools / gadgets. Many top manufacturers and suppliers, have stopped accepting orders due to the high demand and shortage of supply. Some are taking pre-orders. While others are asking clients to join their mailing list, to be notified once hotspot mining devices are available for sale and delivery again.

For more information on the Linxdot hotspot, click here. Or, to jump back to the homepage, click here.

References

1. Nebra Ltd., retrieved from: https://www.nebra.com/products/helium-outdoor-hotspot-miner-gateway
2. Helium, Frequencies on the Helium Network, retrieved from: https://docs.helium.com/lorawan-on-helium/frequency-plans
3. Nebra Ltd., Nebra Online Store, retrieved from: https://nebra.com

SpotiCity